mic'ing

If you're new to recording and don't own a microphone to place in front of your amplifier, you can use the Line Out on your amp. This sends a line-level signal (not powered, like the speaker out... don't use that) via cable to your computer. if your computer has a 1/4" microphone input, you can use a cable that runs from 1/4" (out of amp) to 1/8" (into computer). Though the tone of what you're sending doesn't include the sound you like from the power section of your amp, your speaker, or cabinet... it's better than nothing. Yesterday's tip was to use two amps for recording. continue reading...

The next time you find yourself in the studio, bring two amps to play through. Using a splitter or A/B box does the job to send the signal of your bullet mic into both amps. You can also plug in the Input 1 of one amp, and then with an instrument cable run out the Input 2 or Line Out of that amp into the input of the other. The studio engineer will mic each amp separately and will place a third mic in the room to pickup the ambient (room sound) of your rig, especially if it's a live (reflective) room. continue reading...