Wiha Screwdriver
Hi Kinya,
I have a Progressive Series Special 20 and I want to remove the cover plates. Which Wiha screwdriver do I need to buy? I have the Pozi driver that you recommend for the reed plates.
Thank you, Mike
Hi Kinya,
Which Wiha screwdriver do you use for the cover plate screws? Thanks again for your help. Mike
Hello Mike
I use the WIHA 261/PH 1x60 for all my Hohner work, including the new Progressive Series
Your Harpsmith, Kinya
Your Harpsmith, Kinya
Thank you, Kinya. I haven't played harp for a while because I didn't know much about reed gapping. Now I have some tools and your videos. I'll be playing again and I have you to thank. Mike
Hi Mike
That's terrific news. If there are questions that the Harp Tech Study series did not address, don't hesitate to post it on this forum.
Your Harpsmith, Kinya
I also have found getting the smaller "0" size Wiha PoziDriv to be really useful. The metal on the screws used on harps is soft and easy to strip. Sometimes you'll run into a need for the smaller size. The PoziDriv "0" is the screwdriver to use on the Seydel coverplate screws. FYI PoziDriv screwdrivers only come in two sizes a "0" and a "1". The model I use is the ... they're $4.78 each.
Great tip Jon. Thank you!
Kinya
I have found suppliers for whole reed plate sets for the SCX 56 but is it possible to buy individual reeds?
Hi Phil, I believe replacing the entire reed plate is the only way to perform reed repairs on the Suzuki SCX56 harmonica. Did you check with Suzuki Music USA for reed availability?
Daron Stinton, SUZUKI Music USA
(800) 854-1594, ext. 44411 dstinton@suzukicorp.com
Your Harpsmith, Kinya
Hi Mike, that's exactly the one I use (alot). It works great.
Your Harpsmith, Kinya