Skip to main content
Blues Harmonica logo

User Account

Username:*
Password:*
Forgot Your Password?

Visitor Menu

  • Sign Up
  • Sample Lesson #1
  • Sample Lesson #2
  • Student Recordings
  • Forums
Forums :: Ask Harp Mic Expert Greg Heumann

Turner CX Challenger

1 reply [Last post]
Sun, 06/24/2012 - 21:36
Troy Wilson
Troy Wilson's picture
Offline
Joined: 12/19/2009

What's the best way to open up a Turner CX Challenger to see the element, it has no screws in the grill to take out like on the Shure bullets.

Top
Wed, 07/11/2012 - 15:28
#1
Mic Expert Frit...
Mic Expert Fritz Hasenpusch's picture
Offline
Joined: 01/16/2010
Troy, if you look at the 6

Troy, if you look at the 6 o'clock position (bottom of the circle) of the Turner's grill you'll notice a slightly wider gap in the seem between the grill and body. The grill can be separated from the shell by inserting a small flathead screwdriver or similar tool into this gap and lightly prying. Note there's often a "keyway", a little bump with a corresponding slot it needs to line-up with when repositioning the grill on the body.

Top

Sign me up!

The low monthly subscription of $16.95 gives you full access! We accept major credit cards and PayPal.

Subscribe

Free Sample Lessons

After watching the BluesHarmonica.com overview video, try one of the lessons below to experience a lesson at BluesHarmonica.com.

  • Tongue Blocking Study 2 – This study is for the newer player or the player new to tongue blocking
  • Bending Study 5 – This is for the advanced player looking to improve their bending skills

Contributors

  • Aki Kumar
  • Joe Tartaglia
  • Gary Smith
  • Mark Hummel
  • Joe Filisko

Site Links

  • About David Barrett
  • Accredited Instructors
  • Links
  • Terms and Conditions
  • Contact Us
Hohner
© 2009 - 2022 David Barrett and the Harmonica Masterclass Co. for Bluesharmonica.com