TBT 3d print
Mon, 12/27/2021 - 00:13
Hi David,
I live in UAE, where I don't think I can have the TBT delivered to.
Can you please share a 3d blueprint to have it made locally?
Cheers,
Eugene.
Mon, 12/27/2021 - 15:24
#2
And if you've got an empty plastic jug handy ...
If you don't do 3D printing, Joe Filisko has posted on his site his two-page tongue-blocking article from Harmonica Happenings back in 1998, with instructions and illustrations for making a TBT out of the handle of a plastic jug. https://www.filiskostore.com/files/1900363/uploaded/Tongue%20Block%20Training%20Instruction.pdf My personal suggestions: If you use a plastic jug full of laundry detergent, probably best to thoroughly wash and rinse it before you cut it up for a TBT. If it's an emply whiskey jug, though, probably good not to rinse it at all!
Hello Eugene. Yes, here is a recent post with the information...
A fellow student designed a tongue block trainer that can be made with a 3D printer.
If you own a 3D printer, you can download the file here https://www.thingiverse.com/thing:1579178
For those that live within the United States, you can order from Craftcloud with this direct cart link https://craftcloud3d.com/offer/a4659bf2-b7a0-41d4-ac65-6a4fcd3f09e9?utm_...
If you live outside the US, you will need to configure the cart yourself to place the order. To order, follow this link with the file in it https://craftcloud3d.com/configuration/abfa1cbc-7031-4be0-84b7-d5a1c9cefa38 and configure with the following... Material: MJF Nylon PA12 and Finish: Raw Color- Solid Gray