Skip to main content

Reed plate screws

2 replies [Last post]
Wed, 04/03/2013 - 06:59
blues38
blues38's picture
Offline
Level 8
Joined: 12/20/2009

Kinya,

I've found a source for buying Marine Band Deluxe reed plates, however I still have to get the screws, probably from Micro-Mark. What is the screw size I need to order?

Thanks,

Top
Wed, 04/03/2013 - 09:27
#1
Eddy Vanschepdael
Eddy Vanschepdael's picture
Offline
Teacher 3Level 7
Joined: 08/19/2010
Answer

Hi blues38,

The size is M1.6 x 10.

Best Regards,

Eddy

Top
Mon, 04/08/2013 - 07:32
#2
Harp Tech Kinya...
Harp Tech Kinya Pollard's picture
Offline
Expert
Joined: 02/07/2010
Reed Plate Screws

Thanx Eddy!

Hi Blues38,
If you are not able to locate the metric machine screws (bolts), then MicroMark has a good alternate:

0-80 x 3/8" (hex or round head)

It would also be a good idea to run a 0-80 TAP through the draw reed plate holes to convert the metric to standard fine threads.

Your Harpsmith,
Kinya

Top