Skip to main content
Blues Harmonica logo

User Account

Username:*
Password:*
Forgot Your Password?

Visitor Menu

  • Sign Up
  • Sample Lesson #1
  • Sample Lesson #2
  • Student Recordings
  • Forums
Forums :: Ask Harp Tech Expert Kinya Pollard

Metric sizes

1 reply [Last post]
Mon, 02/06/2017 - 06:50
notsofast
notsofast's picture
Offline
Level 6
Joined: 01/03/2014

Hi Kinya

Great series on harp tech thanks.  I live in France and am struggling to get 0-80 tap and 3/32 bolts to do some reed replacements. Would M2.5 do the job? Thanks

Andy

Top
Wed, 02/08/2017 - 20:25
#1
Harp Tech Kinya...
Harp Tech Kinya Pollard's picture
Offline
Expert
Joined: 02/07/2010
Hi Andy, good to hear from

Hi Andy, good to hear from you.

M2.5 machine screws would be too large for reed/rivet replacement. I suggest you use M1.4 machine screws.

Your Harpsmith, Kinya

Top

Sign me up!

Full access to all lessons starts at $20/month! (with annual subscription)

Subscribe

Free Sample Lessons

After watching the BluesHarmonica.com overview video, try one of the lessons below to experience a lesson at BluesHarmonica.com.

  • Tongue Blocking Study 2 – This study is for the newer player or the player new to tongue blocking
  • Bending Study 5 – This is for the advanced player looking to improve their bending skills

Contributors

  • Aki Kumar
  • Joe Tartaglia
  • Gary Smith
  • Mark Hummel
  • Joe Filisko

Site Links

  • About David Barrett
  • Accredited Instructors
  • Links
  • Terms and Conditions
  • Contact Us
Hohner
© 2009 - 2025 David Barrett and the Harmonica Masterclass Co. for Bluesharmonica.com