Ask Harp Tech Expert Kinya Pollard

Topic	Replies	Views	Created	Last reply
Reed buzzes on sustained 2 draw whole step bend	5	2619	by Dave Hall 03/28/2015 - 02:31	by Harp Tech Kinya... 03/30/2015 - 20:18
Zero-Point too tight OTB	3	2052	by stevetech 03/20/2015 - 09:04	by Harp Tech Kinya... 03/23/2015 - 08:42
reed alignment	3	2483	by jfpaschal 03/06/2015 - 20:00	by Harp Tech Kinya... 03/23/2015 - 08:41
Crossover tuning	7	3456	by Taylor Ward 03/09/2015 - 20:49	by SFJorge 03/18/2015 - 11:52
Uncooperative Reeds	4	2245	by SFJorge 03/16/2015 - 14:09	by SFJorge 03/18/2015 - 10:41
Problem with 4 draw on a new chromatic super deluxe.	2	1843	by Roncw 03/14/2015 - 16:20	by Harp Tech Kinya... 03/15/2015 - 06:24
Low Ab	6	2666	by Taylor Ward 02/21/2015 - 15:22	by Harp Tech Kinya... 03/15/2015 - 06:20
Tools list	3	2319	by Taylor Ward 03/11/2015 - 20:10	by Harp Tech Kinya... 03/15/2015 - 06:19
Gapping issue	1	2324	by Mark Vincent 03/10/2015 - 19:32	by Harp Tech Kinya... 03/11/2015 - 10:28
Post ultra sonic cleaning	4	2702	by msudvm97 02/22/2015 - 23:47	by Harp Tech Kinya... 03/09/2015 - 13:34
A few new handy harpsmithy products	5	2266	by Taylor Ward 02/17/2015 - 16:01	by Harp Tech Kinya... 03/04/2015 - 10:26
Ultrasonic cleaning	3	3776	by timblues 01/16/2012 - 13:26	by Harp Tech Kinya... 03/04/2015 - 07:48
A440 Tuning?	4	6748	by Taylor Ward 02/07/2015 - 18:13	by Harp Tech Kinya... 03/04/2015 - 07:44
Two Harmonica System	2	2341	by 2player 02/22/2015 - 21:42	by Harp Tech Kinya... 03/04/2015 - 07:39
Low Bending	1	2046	by Taylor Ward 02/21/2015 - 13:56	by Harp Tech Kinya... 03/04/2015 - 07:19
Curved reed ends	3	3224	by Taylor Ward 02/16/2015 - 20:07	by Taylor Ward 02/20/2015 - 16:56
Too tight of tolerance?	2	2035	by Taylor Ward 02/16/2015 - 20:04	by Harp Tech Kinya... 02/20/2015 - 14:11
Manji	4	3372	by Taylor Ward 01/31/2015 - 16:41	by Jorge M 02/16/2015 - 17:54
HARMONICOCCUS!	10	7810	by Harp Tech Kinya... 11/09/2013 - 08:03	by Harp Tech Kinya... 02/15/2015 - 11:16
ultrasonic cleaners	0	1920	by msudvm97 02/12/2015 - 05:48	n/a
Hohner Screwdriver	7	6806	by Taylor Ward 01/31/2015 - 16:49	by mx 02/10/2015 - 21:05
clearanceing hole	3	2141	by jfpaschal 02/09/2015 - 21:34	by jfpaschal 02/10/2015 - 15:04
Q tips	3	2153	by Taylor Ward 02/07/2015 - 17:44	by Harp Tech Kinya... 02/09/2015 - 20:49
Gapping, Tuning, Embossing, Reed Shaping	1	4621	by Taylor Ward 02/07/2015 - 17:56	by Harp Tech Kinya... 02/08/2015 - 09:58
Basic repair / tune up kit	4	2857	by msudvm97 02/02/2015 - 23:08	by Harp Tech Kinya... 02/08/2015 - 09:30